Why Is My Whirlpool Washer Not Spinning Storables A. there are several common reasons why a whirlpool washer may stop spinning, including a faulty lid switch, worn out drive belt, malfunctioning motor coupling, or a clogged drain hose. additionally, issues with the washer’s motor, transmission, or control board can also cause it to stop spinning. Test the washer: after replacing the drive belt, plug the washer back in and run a test cycle to ensure that the drainage and spinning issues have been resolved. make sure the drum is rotating smoothly with the new belt.
Why Is Whirlpool Washer Not Spinning Gadgetswright Cleaning the sensor connection. if your whirlpool washer is stuck on the sensing cycle, a dirty or loose sensor connection could be to blame. over time, the sensor connection between the control board and other components may become dirty or loose, which can interfere with the proper communication between them, causing the washer to remain stuck. The drain pump may be clogged or defective. if your machine has a belt, check it. check the door lock or lid switch (most common issue) the clutch (not a common issue) the washer timer or control board failed (not common issue) unbalanced load. drain hose clogged. shift actuator failed. drain filter clogged. 2. check the fuse box and outlet for power failures. start with the easiest fix by checking the plug in the outlet. then, if the circuit breaker is flipped, reset the fuse and run the cycle again. last, check the outlet itself to ensure it’s actually working by plugging in a phone charger or nightlight. Q: why is my whirlpool washing machine making a loud noise? a loud noise from your whirlpool washing machine can be caused by a variety of reasons, including an unbalanced load, loose or worn out belts, or faulty bearings. it’s essential to identify and address the underlying issue to prevent further damage to the machine.
Comments are closed.