Trico Corporation Closed System Opto Maticв Oiler Installation Youtube In this video, we show how to go through the installation of trico's opto matic® oiler in a closed system configuration.related links: tricocorp.c. Way back in early 2000, we created a video on the proper way to install an opto matic oiler. this video explains, step by step, how to set the level of the constant level oiler. basically, the steps go as follows: mark the outside of the bearing housing where the oil level should be. pipe the lower casting so it is parallel to the oil level.
Opto Matic Closed System Constant Level Oiler Trico Corporati Closed system opto matic constant level oiler with sight gauge. the closed system opto matic oiler is designed for all types of equipment where a constant level in an oil housing must be maintained. a 1 8” npt port is provided for a vent line back to the housing to allow pressure balancing between the oiler and the housing. Opto matic oiler glass. constant level oilers have been utilized on rotating equipment for more than 90 years. they are the most effective and widely used method of maintaining the proper oil level in process and rotating equipment that depletes lubricant through use, wear, and friction. they are simple in design with no moving parts and. Tricocorp this video demonstrates the proper method of installing the trico opto matic constant level lubricator. Place thumb over reservoir spout, invert, and insert the spout into the main body of closed system until upper casting bottoms out on the collar. oil may drain out of the reservoir and into bearing housing. secure set screws on upper casting. start up machine and verify proper oil level is being fig. 3 maintained. 5.
Comments are closed.