Ikea Billy Bookcase Hack Diy Built In Bookcase House Of Navy If you are wanting to have hard wired lighting, this is where you want to call in an electrician. materials used for ikea hack. ikea materials. we purchased and put together the following ikea billy bookcase items: (4) billy bookcases 31.5″x79″x11″ (4) billy bookcase height extension 32″x14″x11″ (8) oxberg doors. Step one: first, i built a base for my bookcases. a base elevates the shelves from the floor, and gives the entire piece a feeling of substance. the base is built out of a 2×4 frame, with interior studs to support the plywood top of the base. step two: cut a piece of plywood to cover the top of the 2×4 base frame.
Diy Built In Bookshelves Using The Ikea Billy Bookcase Hackођ Step 1 – remove baseboard. to get the billy bookcases as flush as possible to the blank wall, remove the baseboard and shoe molding trim piece. use a utility knife to cut along the caulk lines of the baseboard. then, use a claw back hammer and a small pry bar to pull the baseboard away from the wall. We purchased three of the ikea billy bookcases, built them, and spaced them out evenly along the wall. we spaced the boards out 11.25 inches in order to eliminate any wasted space. from there, we cut boards and nailed them in between each bookcase. each board is 75 inches tall by 11.25 inches wide, purchased from home depot. Arched billy bookcase hack. photo: firsthouseonfinn. the inspiration was a magnolia arched cabinet. rachael and garret set out to create the same style in their front room, hacking 4 billy bookcases for good measure. the transformation is breath taking and seriously, they look every inch bespoke built in cabinets. Add trim back to the bottom of the bookshelves. 15. use spackle to fill in the adjustable shelving holes inside the billy bookcases. 16. let spackle dry for an hour, then sand down. 17. apply a.
Comments are closed.