How To Use Glucometer How To Check Blood Sugar Monitor Blood

How To Use A Glucometer For Blood Sugar Monitoring Turn on the glucometer. this is usually done by inserting a test strip. the glucometer screen will tell you when it's time to put blood on the strip. use the lancing device to pierce the side of your finger, next to the fingernail (or another recommended location). this hurts less than lancing the pads of your fingers. The most common type of blood sugar monitoring involves using a glucose meter and test strips. this is a “finger stick check.” you prick your fingertip with a small needle called a lancet to produce a blood drop. you then place the drop against the test strip in the glucose meter, and the meter shows your blood sugar level within seconds.

How To Use A Glucometer For Blood Sugar Monitoring Massage or shake out your hand to get blood into your finger. use a lance to prick your finger. squeezing from the base of the finger, gently place a small amount of blood onto the test strip. place the strip in the meter. after a few seconds, the blood sugar reading will appear. track and record your results. Hold the lancing device to the side of your finger and press the trigger. don't worry, it shouldn't really hurt. squeeze your finger just a little to get a drop of blood. gently touch the strip. To use your blood glucose meter, follow these steps: wash and dry your hands throughly. food or other substances on the finger can affect the reading. take a test strip and insert it into the meter. insert an unused lancet into the lancet device to gently prick your fingertip. touch the edge of the test strip to the drop of blood on your finger. Glucose monitoring can be done in two ways, blood glucose monitoring (bgm) and continuous glucose monitoring (cgm). blood glucose monitoring — bgm requires fingersticks to get small samples of blood. the glucose level in the blood sample is measured with a glucose meter. the detailed steps for checking blood glucose through bgm are described.