How To Replace Upper And Lower Radiator Hoses Youtube Radiator hoses connect the top of the radiator to the top of the engine, as well as the bottom of the radiator to the water pump. radiator hoses are essentia. This video will show you how to replace the upper and lower radiator hoses on a jeep wrangler🔧buy antifreeze: amzn.to 3ziblkp🔧buy upper radiator ho.
How To Replace A Radiator Hose Upper And Lower Youtube Learn how to diagnose a bad radiator hose visually, and by feel. also learn how to replace the upper and lower radiator hoses. most radiator hoses will last. Step 6: install new upper radiator hose. replace the upper hose and clamps. connect the lower portion of the hose to the thermostat housing outlet first. do it right: if you use threaded hose clamps, make sure to tighten the clamps to manufacturer specifications. connect the upper portion of the hose to the radiator inlet. Step 2: install the radiator hose. slide the hose onto the connector. then, position and secure the clamps at least 1 4 in. (6.35mm) from the ends of the hose. check to ensure the clamps are located beyond the raised bead of the connector and then tighten them down. step 3: refill the radiator. 3. remove the clamp on the lower radiator hose at the radiator using the appropriate tool (pliers, socket, or screwdriver. this will vary by year, make, and model.). use a twisting motion to break the seal on the hose and remove the hose. i use a pair of pliers if i can't break the seal by hand.
Comments are closed.