How To Mulch Around Trees And Shrubs 1. clear the area. begin by clearing the area around the tree. remove rocks, excess dirt, or old mulch to expose the tree trunk. this step allows you to assess the condition of the tree and ensure there are no obstructions. 2. trim upward growing roots. use pruners to trim any roots growing above the ground. 2. spread mulch in a 4–5 ft (1.2–1.5 m) diameter around the tree. apply a thin layer of mulch around the tree, not touching the tree itself. leave 1–2 inches (2.5–5.1 cm) of space between the base of the tree and the mulch. [2] remove any existing mulch, if necessary, by shoveling or spading it away.
How To Apply Mulch Around Trees Kasey Picard Using it can improve soil moisture, which you can measure using a tester. the soil around a tree needs to hold moisture, especially if the tree is young. the sun evaporates water as it beats down, especially during the heat of the day. a layer of mulch will prevent the sun from hitting the soil, limiting water loss. Spread mulch under trees, shrubs, and throughout planting beds to a recommended depth of 3 to 4 inches for medium to coarse textured materials. pull mulch away from the bases of tree and shrub trunks, creating a donut hole (image on left). do not pile it up against the trunk (“volcano mulching”). Step 1: determine the tree’s drip line. the drip line of a tree is where rainwater drips off the outer edge of the tree branches. you can usually determine this by looking at the tree canopy and locating the point directly under the longest branches. measure the distance to the trunk. Mulch is a material applied to the surface of the soil around trees and shrubs. mulch reduces weeds, conserves soil moisture, and minimizes soil erosion. mulching is a standard horticulture practice. maximize the growth of new trees and shrubs by mulching an area underneath the plants instead of planting grass, shrubs, or groundcover.
Comments are closed.