How To Install Speed Chip In Ezgo Golf Cart Pds Freedom Chip Here is how to install speed chip in ezgo golf cart pds. 1 flip the “run – tow” switch to tow. 2 remove the cover (controller environmental cover). 3 plug the speed chip into the controller (see photo for location). 4 reinstall the cover. 5 flip the “run – tow” switch back to run. to make sure what mode you have now achieved. The ez go speed chip, sometimes also called a freedom chip, is compatible with golf carts that use an electric power drive system (pds) and are model year 2000 or newer. the chip increases the cart’s maximum speed from 13.5 mph to 19 mph. installation of the freedom chip is easy and requires no tools. determine whether your golf cart can use.
How To Install Speed Chip In Ezgo Golf Cart Pds Freedom Chip To install ezgo pds chip personality plug follow these steps: 1 flip the “run – tow” switch to tow. 2 remove the cover from the controller. 3 plug in the jumper chip of your choice. 4 reinstall the controller cover. 5 flip the “run – tow” switch back to run. in order to find out what mode it changed to you must toggle the forward. This helps to increase the speed of the cart from 13.5mph to 19mph. lift the passenger seat of the cart and locate the computer controller housed adjacent to the battery pack. check if the controller has a run tow switch. carts without this switch can’t make use of a speed chip. adjust the switch to tow mode. Installing a chip plug in a ezgo pds controller and determining which chip plug is installed. to install the chip plug into the controller: 1 flip the "run tow" switch to tow. 2 remove the controller cover. 3 plug in the jumper (chip). 4 replace the cover. 5 flip the run tow switch back to run. Jul 25, 2009. #1. just purchased my first golf cart, a 2006 ezgo pds and am having a blast with it, and with learning about how it works, and what mods can be done. my first project was to install the speed chip plug. it is used primarily for golf. after reading the wealth of info on cartaholics golf cart forum i decided to install a switch to.
Comments are closed.