How To Fix A Kenmore Washer That Won T Drain Or Spin At Edward Matson Blog Quick and easy appliance diy repair videos – save big $$$ by fixing it yourself if the video was helpful, remember to give it a thumbs up 👍 and consider s. How to repair a kenmore washer that sounds like it's spinning, but it's not. this is a very simple repair you can easily do yourself. the motor coupler is.
How To Fix A Kenmore Washer That Won T Drain Or Spin At Edward Matson Blog Step 3: check the water level control if the machine isn't spinning. open the control panel, and look for the water level valve. if the plastic tube attached to it appears clogged, vinegar can clear it up. if the switch itself appears corroded, it may be necessary to replace it. If the washer won't drain the lid switch assembly might be defective. this is a very common problem. the lid switch assembly can fail either mechanically or electrically. test any electrical switches with an ohm meter for continuity. the switches should have continuity according to their design. door lock motor and switch assembly. Check for blockages in the drain hose. when your kenmore washer won’t drain, the first step is to check for blockages in the drain hose. here’s what you can do: start by disconnecting the washer from the power source. locate the drain hose at the back of the machine. remove the hose and inspect it for any clogs caused by lint, debris, or. 01 lid switch assembly. the lid switch assembly prevents the washer from spinning when the lid is open. if the lid switch assembly fails, the washer will not spin. to determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. if the lid switch does not have continuity, replace it.
Comments are closed.