Ford Edge Electric Fan Assembly Removal And Installation Youtube I found i needed to remove the fan assembly in order to remove the the bad alternator. not a real difficult job but requires some manipulation of the fan to. The electric fan assemblies are prone to going out on the lincoln mkx ford edge platform. i'll show you how to switch to an updated design with this 2013 lin.
Fan Assembly Replacement Ford Edge Lincoln Mkx Youtube There is a certain way to do this installation which makes it very easy. Lift the tabs and remove the top mounts. examine the radiator. notice 2 mounting nuts (sheet metal insert) and 2 y shaped setup that hold the fan. the other side looks just the same. 2 mounting nuts and 2 y shaped pieces hold the condenser via z shaped (double 90 degree bends) metal bracket. tilt the radiator top toward the engine. Engine cooling fan motor, fan blade and fan shroud assembly, electrical removal. disconnect (pull apart) the male female cooling fan motor wiring connector at the side of the fan shroud (8146). remove the male terminal connector retaining clip from the fan shroud mounting tab. remove two fan shroud upper retaining bolts at the radiator tanks. Step 3: unplug the connectors for the fan control module. before the fan control module is removed the electrical connectors must be removed. there may be multiple connectors depending on how many fans the unit controls. unplug the connectors and set them close but out of the way. step 4: removing the fan control module.
Comments are closed.